Reposting after was mistakenly removed by mods (since resolved - Thanks)submitted by xSeq22x to CryptoCurrency [link] [comments]
A frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important.
For better formatting see https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b
CosmosCosmos is a heterogeneous network of many independent parallel blockchains, each powered by classical BFT consensus algorithms like Tendermint. Developers can easily build custom application specific blockchains, called Zones, through the Cosmos SDK framework. These Zones connect to Hubs, which are specifically designed to connect zones together.
The vision of Cosmos is to have thousands of Zones and Hubs that are Interoperable through the Inter-Blockchain Communication Protocol (IBC). Cosmos can also connect to other systems through peg zones, which are specifically designed zones that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Cosmos does not use Sharding with each Zone and Hub being sovereign with their own validator set.
For a more in-depth look at Cosmos and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Cosmos on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
PolkadotPolkadot is a heterogeneous blockchain protocol that connects multiple specialised blockchains into one unified network. It achieves scalability through a sharding infrastructure with multiple blockchains running in parallel, called parachains, that connect to a central chain called the Relay Chain. Developers can easily build custom application specific parachains through the Substrate development framework.
The relay chain validates the state transition of connected parachains, providing shared state across the entire ecosystem. If the Relay Chain must revert for any reason, then all of the parachains would also revert. This is to ensure that the validity of the entire system can persist, and no individual part is corruptible. The shared state makes it so that the trust assumptions when using parachains are only those of the Relay Chain validator set, and no other. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. The hope is to have 100 parachains connect to the relay chain.
For a more in-depth look at Polkadot and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Polkadot on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
AvalancheAvalanche is a platform of platforms, ultimately consisting of thousands of subnets to form a heterogeneous interoperable network of many blockchains, that takes advantage of the revolutionary Avalanche Consensus protocols to provide a secure, globally distributed, interoperable and trustless framework offering unprecedented decentralisation whilst being able to comply with regulatory requirements.
Avalanche allows anyone to create their own tailor-made application specific blockchains, supporting multiple custom virtual machines such as EVM and WASM and written in popular languages like Go (with others coming in the future) rather than lightly used, poorly-understood languages like Solidity. This virtual machine can then be deployed on a custom blockchain network, called a subnet, which consist of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance.
Avalanche was built with serving financial markets in mind. It has native support for easily creating and trading digital smart assets with complex custom rule sets that define how the asset is handled and traded to ensure regulatory compliance can be met. Interoperability is enabled between blockchains within a subnet as well as between subnets. Like Cosmos and Polkadot, Avalanche is also able to connect to other systems through bridges, through custom virtual machines made to interact with another ecosystem such as Ethereum and Bitcoin.
For a more in-depth look at Avalanche and provide more reference to points made in this article, please see here and here
(There's a youtube video with a quick video overview of Avalanche on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
Comparison between Cosmos, Polkadot and AvalancheA frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions. I want to stress that it’s not a case of one platform being the killer of all other platforms, far from it. There won’t be one platform to rule them all, and too often the tribalism has plagued this space. Blockchains are going to completely revolutionise most industries and have a profound effect on the world we know today. It’s still very early in this space with most adoption limited to speculation and trading mainly due to the limitations of Blockchain and current iteration of Ethereum, which all three of these platforms hope to address. For those who just want a quick summary see the image at the bottom of the article. With that said let’s have a look
CosmosEach Zone and Hub in Cosmos is capable of up to around 1000 transactions per second with bandwidth being the bottleneck in consensus. Cosmos aims to have thousands of Zones and Hubs all connected through IBC. There is no limit on the number of Zones / Hubs that can be created
PolkadotParachains in Polkadot are also capable of up to around 1500 transactions per second. A portion of the parachain slots on the Relay Chain will be designated as part of the parathread pool, the performance of a parachain is split between many parathreads offering lower performance and compete amongst themselves in a per-block auction to have their transactions included in the next relay chain block. The number of parachains is limited by the number of validators on the relay chain, they hope to be able to achieve 100 parachains.
AvalancheAvalanche is capable of around 4500 transactions per second per subnet, this is based on modest hardware requirements to ensure maximum decentralisation of just 2 CPU cores and 4 GB of Memory and with a validator size of over 2,000 nodes. Performance is CPU-bound and if higher performance is required then more specialised subnets can be created with higher minimum requirements to be able to achieve 10,000 tps+ in a subnet. Avalanche aims to have thousands of subnets (each with multiple virtual machines / blockchains) all interoperable with each other. There is no limit on the number of Subnets that can be created.
ResultsAll three platforms offer vastly superior performance to the likes of Bitcoin and Ethereum 1.0. Avalanche with its higher transactions per second, no limit on the number of subnets / blockchains that can be created and the consensus can scale to potentially millions of validators all participating in consensus scores ✅✅✅. Polkadot claims to offer more tps than cosmos, but is limited to the number of parachains (around 100) whereas with Cosmos there is no limit on the number of hubs / zones that can be created. Cosmos is limited to a fairly small validator size of around 200 before performance degrades whereas Polkadot hopes to be able to reach 1000 validators in the relay chain (albeit only a small number of validators are assigned to each parachain). Thus Cosmos and Polkadot scores ✅✅
CosmosTendermint consensus is limited to around 200 validators before performance starts to degrade. Whilst there is the Cosmos Hub it is one of many hubs in the network and there is no central hub or limit on the number of zones / hubs that can be created.
PolkadotPolkadot has 1000 validators in the relay chain and these are split up into a small number that validate each parachain (minimum of 14). The relay chain is a central point of failure as all parachains connect to it and the number of parachains is limited depending on the number of validators (they hope to achieve 100 parachains). Due to the limited number of parachain slots available, significant sums of DOT will need to be purchased to win an auction to lease the slot for up to 24 months at a time. Thus likely to lead to only those with enough funds to secure a parachain slot. Parathreads are however an alternative for those that require less and more varied performance for those that can’t secure a parachain slot.
AvalancheAvalanche consensus scan scale to tens of thousands of validators, even potentially millions of validators all participating in consensus through repeated sub-sampling. The more validators, the faster the network becomes as the load is split between them. There are modest hardware requirements so anyone can run a node and there is no limit on the number of subnets / virtual machines that can be created.
ResultsAvalanche offers unparalleled decentralisation using its revolutionary consensus protocols that can scale to millions of validators all participating in consensus at the same time. There is no limit to the number of subnets and virtual machines that can be created, and they can be created by anyone for a small fee, it scores ✅✅✅. Cosmos is limited to 200 validators but no limit on the number of zones / hubs that can be created, which anyone can create and scores ✅✅. Polkadot hopes to accommodate 1000 validators in the relay chain (albeit these are split amongst each of the parachains). The number of parachains is limited and maybe cost prohibitive for many and the relay chain is a ultimately a single point of failure. Whilst definitely not saying it’s centralised and it is more decentralised than many others, just in comparison between the three, it scores ✅
CosmosTendermint consensus used in Cosmos reaches finality within 6 seconds. Cosmos consists of many Zones and Hubs that connect to each other. Communication between 2 zones could pass through many hubs along the way, thus also can contribute to latency times depending on the path taken as explained in part two of the articles on Cosmos. It doesn’t need to wait for an extended period of time with risk of rollbacks.
PolkadotPolkadot provides a Hybrid consensus protocol consisting of Block producing protocol, BABE, and then a finality gadget called GRANDPA that works to agree on a chain, out of many possible forks, by following some simpler fork choice rule. Rather than voting on every block, instead it reaches agreements on chains. As soon as more than 2/3 of validators attest to a chain containing a certain block, all blocks leading up to that one are finalized at once.
If an invalid block is detected after it has been finalised then the relay chain would need to be reverted along with every parachain. This is particularly important when connecting to external blockchains as those don’t share the state of the relay chain and thus can’t be rolled back. The longer the time period, the more secure the network is, as there is more time for additional checks to be performed and reported but at the expense of finality. Finality is reached within 60 seconds between parachains but for external ecosystems like Ethereum their state obviously can’t be rolled back like a parachain and so finality will need to be much longer (60 minutes was suggested in the whitepaper) and discussed in more detail in part three
AvalancheAvalanche consensus achieves finality within 3 seconds, with most happening sub 1 second, immutable and completely irreversible. Any subnet can connect directly to another without having to go through multiple hops and any VM can talk to another VM within the same subnet as well as external subnets. It doesn’t need to wait for an extended period of time with risk of rollbacks.
ResultsWith regards to performance far too much emphasis is just put on tps as a metric, the other equally important metric, if not more important with regards to finance is latency. Throughput measures the amount of data at any given time that it can handle whereas latency is the amount of time it takes to perform an action. It’s pointless saying you can process more transactions per second than VISA when it takes 60 seconds for a transaction to complete. Low latency also greatly increases general usability and customer satisfaction, nowadays everyone expects card payments, online payments to happen instantly. Avalanche achieves the best results scoring ✅✅✅, Cosmos with comes in second with 6 second finality ✅✅ and Polkadot with 60 second finality (which may be 60 minutes for external blockchains) scores ✅
CosmosEvery Zone and Hub in Cosmos has their own validator set and different trust assumptions. Cosmos are researching a shared security model where a Hub can validate the state of connected zones for a fee but not released yet. Once available this will make shared security optional rather than mandatory.
PolkadotShared Security is mandatory with Polkadot which uses a Shared State infrastructure between the Relay Chain and all of the connected parachains. If the Relay Chain must revert for any reason, then all of the parachains would also revert. Every parachain makes the same trust assumptions, and as such the relay chain validates state transition and enables seamless interoperability between them. In return for this benefit, they have to purchase DOT and win an auction for one of the available parachain slots.
However, parachains can’t just rely on the relay chain for their security, they will also need to implement censorship resistance measures and utilise proof of work / proof of stake for each parachain as well as discussed in part three, thus parachains can’t just rely on the security of the relay chain, they need to ensure sybil resistance mechanisms using POW and POS are implemented on the parachain as well.
AvalancheA subnet in Avalanche consists of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance. So unlike in Cosmos where each zone / hub has their own validators, A subnet can validate a single or many virtual machines / blockchains with a single validator set. Shared security is optional
ResultsShared security is mandatory in polkadot and a key design decision in its infrastructure. The relay chain validates the state transition of all connected parachains and thus scores ✅✅✅. Subnets in Avalanche can validate state of either a single or many virtual machines. Each subnet can have their own token and shares a validator set, where complex rulesets can be configured to meet regulatory compliance. It scores ✅ ✅. Every Zone and Hub in cosmos has their own validator set / token but research is underway to have the hub validate the state transition of connected zones, but as this is still early in the research phase scores ✅ for now.
CosmosThe Cosmos project started in 2016 with an ICO held in April 2017. There are currently around 50 projects building on the Cosmos SDK with a full list can be seen here and filtering for Cosmos SDK . Not all of the projects will necessarily connect using native cosmos sdk and IBC and some have forked parts of the Cosmos SDK and utilise the tendermint consensus such as Binance Chain but have said they will connect in the future.
PolkadotThe Polkadot project started in 2016 with an ICO held in October 2017. There are currently around 70 projects building on Substrate and a full list can be seen here and filtering for Substrate Based. Like with Cosmos not all projects built using substrate will necessarily connect to Polkadot and parachains or parathreads aren’t currently implemented in either the Live or Test network (Kusama) as of the time of this writing.
AvalancheAvalanche in comparison started much later with Ava Labs being founded in 2018. Avalanche held it’s ICO in July 2020. Due to lot shorter time it has been in development, the number of projects confirmed are smaller with around 14 projects currently building on Avalanche. Due to the customisability of the platform though, many virtual machines can be used within a subnet making the process incredibly easy to port projects over. As an example, it will launch with the Ethereum Virtual Machine which enables byte for byte compatibility and all the tooling like Metamask, Truffle etc. will work, so projects can easily move over to benefit from the performance, decentralisation and low gas fees offered. In the future Cosmos and Substrate virtual machines could be implemented on Avalanche.
ResultsWhilst it’s still early for all 3 projects (and the entire blockchain space as a whole), there is currently more projects confirmed to be building on Cosmos and Polkadot, mostly due to their longer time in development. Whilst Cosmos has fewer projects, zones are implemented compared to Polkadot which doesn’t currently have parachains. IBC to connect zones and hubs together is due to launch Q2 2021, thus both score ✅✅✅. Avalanche has been in development for a lot shorter time period, but is launching with an impressive feature set right from the start with ability to create subnets, VMs, assets, NFTs, permissioned and permissionless blockchains, cross chain atomic swaps within a subnet, smart contracts, bridge to Ethereum etc. Applications can easily port over from other platforms and use all the existing tooling such as Metamask / Truffle etc but benefit from the performance, decentralisation and low gas fees offered. Currently though just based on the number of projects in comparison it scores ✅.
CosmosCosmos enables permissioned and permissionless zones which can connect to each other with the ability to have full control over who validates the blockchain. For permissionless zones each zone / hub can have their own token and they are in control who validates.
PolkadotWith polkadot the state transition is performed by a small randomly selected assigned group of validators from the relay chain plus with the possibility that state is rolled back if an invalid transaction of any of the other parachains is found. This may pose a problem for enterprises that need complete control over who performs validation for regulatory reasons. In addition due to the limited number of parachain slots available Enterprises would have to acquire and lock up large amounts of a highly volatile asset (DOT) and have the possibility that they are outbid in future auctions and find they no longer can have their parachain validated and parathreads don’t provide the guaranteed performance requirements for the application to function.
AvalancheAvalanche enables permissioned and permissionless subnets and complex rulesets can be configured to meet regulatory compliance. For example a subnet can be created where its mandatory that all validators are from a certain legal jurisdiction, or they hold a specific license and regulated by the SEC etc. Subnets are also able to scale to tens of thousands of validators, and even potentially millions of nodes, all participating in consensus so every enterprise can run their own node rather than only a small amount. Enterprises don’t have to hold large amounts of a highly volatile asset, but instead pay a fee in AVAX for the creation of the subnets and blockchains which is burnt.
ResultsAvalanche provides the customisability to run private permissioned blockchains as well as permissionless where the enterprise is in control over who validates the blockchain, with the ability to use complex rulesets to meet regulatory compliance, thus scores ✅✅✅. Cosmos is also able to run permissioned and permissionless zones / hubs so enterprises have full control over who validates a blockchain and scores ✅✅. Polkadot requires locking up large amounts of a highly volatile asset with the possibility of being outbid by competitors and being unable to run the application if the guaranteed performance is required and having to migrate away. The relay chain validates the state transition and can roll back the parachain should an invalid block be detected on another parachain, thus scores ✅.
CosmosCosmos will connect Hubs and Zones together through its IBC protocol (due to release in Q1 2020). Connecting to blockchains outside of the Cosmos ecosystem would either require the connected blockchain to fork their code to implement IBC or more likely a custom “Peg Zone” will be created specific to work with a particular blockchain it’s trying to bridge to such as Ethereum etc. Each Zone and Hub has different trust levels and connectivity between 2 zones can have different trust depending on which path it takes (this is discussed more in this article). Finality time is low at 6 seconds, but depending on the number of hops, this can increase significantly.
PolkadotPolkadot’s shared state means each parachain that connects shares the same trust assumptions, of the relay chain validators and that if one blockchain needs to be reverted, all of them will need to be reverted. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Finality time between parachains is around 60 seconds, but longer will be needed (initial figures of 60 minutes in the whitepaper) for connecting to external blockchains. Thus limiting the appeal of connecting two external ecosystems together through Polkadot. Polkadot is also limited in the number of Parachain slots available, thus limiting the amount of blockchains that can be bridged. Parathreads could be used for lower performance bridges, but the speed of future blockchains is only going to increase.
AvalancheA subnet can validate multiple virtual machines / blockchains and all blockchains within a subnet share the same trust assumptions / validator set, enabling cross chain interoperability. Interoperability is also possible between any other subnet, with the hope Avalanche will consist of thousands of subnets. Each subnet may have a different trust level, but as the primary network consists of all validators then this can be used as a source of trust if required. As Avalanche supports many virtual machines, bridges to other ecosystems are created by running the connected virtual machine. There will be an Ethereum bridge using the EVM shortly after mainnet. Finality time is much faster at sub 3 seconds (with most happening under 1 second) with no chance of rolling back so more appealing when connecting to external blockchains.
ResultsAll 3 systems are able to perform interoperability within their ecosystem and transfer assets as well as data, as well as use bridges to connect to external blockchains. Cosmos has different trust levels between its zones and hubs and can create issues depending on which path it takes and additional latency added. Polkadot provides the same trust assumptions for all connected parachains but has long finality and limited number of parachain slots available. Avalanche provides the same trust assumptions for all blockchains within a subnet, and different trust levels between subnets. However due to the primary network consisting of all validators it can be used for trust. Avalanche also has a much faster finality time with no limitation on the number of blockchains / subnets / bridges that can be created. Overall all three blockchains excel with interoperability within their ecosystem and each score ✅✅.
CosmosThe ATOM token is the native token for the Cosmos Hub. It is commonly mistaken by people that think it’s the token used throughout the cosmos ecosystem, whereas it’s just used for one of many hubs in Cosmos, each with their own token. Currently ATOM has little utility as IBC isn’t released and has no connections to other zones / hubs. Once IBC is released zones may prefer to connect to a different hub instead and so ATOM is not used. ATOM isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for ATOM as of the time of this writing is $1 Billion with 203 million circulating supply. Rewards can be earnt through staking to offset the dilution caused by inflation. Delegators can also get slashed and lose a portion of their ATOM should the validator misbehave.
PolkadotPolkadot’s native token is DOT and it’s used to secure the Relay Chain. Each parachain needs to acquire sufficient DOT to win an auction on an available parachain lease period of up to 24 months at a time. Parathreads have a fixed fee for registration that would realistically be much lower than the cost of acquiring a parachain slot and compete with other parathreads in a per-block auction to have their transactions included in the next relay chain block. DOT isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for DOT as of the time of this writing is $4.4 Billion with 852 million circulating supply. Delegators can also get slashed and lose their DOT (potentially 100% of their DOT for serious attacks) should the validator misbehave.
AvalancheAVAX is the native token for the primary network in Avalanche. Every validator of any subnet also has to validate the primary network and stake a minimum of 2000 AVAX. There is no limit to the number of validators like other consensus methods then this can cater for tens of thousands even potentially millions of validators. As every validator validates the primary network, this can be a source of trust for interoperability between subnets as well as connecting to other ecosystems, thus increasing amount of transaction fees of AVAX. There is no slashing in Avalanche, so there is no risk to lose your AVAX when selecting a validator, instead rewards earnt for staking can be slashed should the validator misbehave. Because Avalanche doesn’t have direct slashing, it is technically possible for someone to both stake AND deliver tokens for something like a flash loan, under the invariant that all tokens that are staked are returned, thus being able to make profit with staked tokens outside of staking itself.
There will also be a separate subnet for Athereum which is a ‘spoon,’ or friendly fork, of Ethereum, which benefits from the Avalanche consensus protocol and applications in the Ethereum ecosystem. It’s native token ATH will be airdropped to ETH holders as well as potentially AVAX holders as well. This can be done for other blockchains as well.
Transaction fees on the primary network for all 3 of the blockchains as well as subscription fees for creating a subnet and blockchain are paid in AVAX and are burnt, creating deflationary pressure. AVAX is a fixed capped supply of 720 million tokens, creating scarcity rather than an unlimited supply which continuously increase of tokens at a compounded rate each year like others. Initially there will be 360 tokens minted at Mainnet with vesting periods between 1 and 10 years, with tokens gradually unlocking each quarter. The Circulating supply is 24.5 million AVAX with tokens gradually released each quater. The current market cap of AVAX is around $100 million.
ResultsAvalanche’s AVAX with its fixed capped supply, deflationary pressure, very strong utility, potential to receive air drops and low market cap, means it scores ✅✅✅. Polkadot’s DOT also has very strong utility with the need for auctions to acquire parachain slots, but has no deflationary mechanisms, no fixed capped supply and already valued at $3.8 billion, therefore scores ✅✅. Cosmos’s ATOM token is only for the Cosmos Hub, of which there will be many hubs in the ecosystem and has very little utility currently. (this may improve once IBC is released and if Cosmos hub actually becomes the hub that people want to connect to and not something like Binance instead. There is no fixed capped supply and currently valued at $1.1 Billion, so scores ✅.
All three are excellent projects and have similarities as well as many differences. Just to reiterate this article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions, you may have different criteria which is important to you, and score them differently. There won’t be one platform to rule them all however, with some uses cases better suited to one platform over another, and it’s not a zero-sum game. Blockchain is going to completely revolutionize industries and the Internet itself. The more projects researching and delivering breakthrough technology the better, each learning from each other and pushing each other to reach that goal earlier. The current market is a tiny speck of what’s in store in terms of value and adoption and it’s going to be exciting to watch it unfold.
For more information see the articles below (each with additional sources at the bottom of their articles)
Avalanche, a Revolutionary Consensus Engine and Platform. A Game Changer for Blockchain
Avalanche Consensus, The Biggest Breakthrough since Nakamoto
Cosmos — An Early In-Depth Analysis — Part One
Cosmos — An Early In-Depth Analysis — Part Two
Cosmos Hub ATOM Token and the commonly misunderstood staking tokens — Part Three
Polkadot — An Early In-Depth Analysis — Part One — Overview and Benefits
Polkadot — An Early In-Depth Analysis — Part Two — How Consensus Works
Polkadot — An Early In-Depth Analysis — Part Three — Limitations and Issues
|BlockFi||50%||2 resolved, 2 not resolved|
|CDC||58%||29 resolved, 21 not resolved|
|Celsius||61%||23 resolved, 15 not resolved|
|Nexo||67%||8 resolved, 4 not resolved|
|BlockFi||50%||2 resolved, 2 not resolved|
|CDC||58%||29 resolved, 21 not resolved|
|Celsius||61%||23 resolved, 15 not resolved|
|Nexo||67%||8 resolved, 4 not resolved|
TomoChain’s AMA with Binance was recently held on Oct. 19th, 2019 with CEO Long Vuong sharing all the latest updates about TomoChain’s products and potential future projects.submitted by alexngn201 to Tomochain [link] [comments]
*** Below is a brief recap of what happened during the AMA ***
Segment 1: Richie from Binance asked Long Vuong 5 questions.
Richie: Among different blockchains and cryptocurrency projects, what are some key features that set TomoChain aside? What does TomoChain have that other projects don’t?
Long: Some key features which set TomooChain aside include:
/ 2-second block-time and transaction confirmed within almost 4-second.
/ Significantly improvement of user experiences and adoption of blockchain.
/ 2From Tron to TomoChain: 8h.
/ TomoX — a secure and efficient relayer-masternode decentralized cryptocurrency exchange protocol that empowers a diverse system of relayers, MM providers, and independent projects to work together.
Long: Since our mainnet launch, TomoChain has continuously built our ecosystem strong and stable, resulting in:
Long: TomoChain aims to build a safe and credible DeFi system that everyone can benefit from globally, with our recent launch of TomoZ — fees by any token protocol, our decentralized exchange protocol TomoX coming in a couple of weeks, and many more projects in plan for the future.
TomoChain opens up a wide playground for developers to creatively build their own dapps and games. We have an enthusiastic high-tech team that can support you with problems you may have while creating your product. TomoChain’s most recent Dappathon Competition just ended, with 9 final contestants who’ve brought a whole new gaming experience for our community. Thus, many new games are coming up on our platform, encouraging even more developers and game lovers to join. So keep an eye out to try out some of our new games!
Richie: TomoChain has launched TomoZ’s mainnet in August. Can you elaborate on the product and comment on the amount of interest with individuals/businesses you’re seeing in this product?
Long: TomoZ — Zero Friction Protocol — provides inroads to mainstream users who find crypto to be unnecessarily complex. It is the first on-chain protocol that offers the ability for any user to pay transaction fees with the same token that the user is holding.
TomoZ removes the friction of having to hold native blockchain coins/tokens to send to other wallets or to interact with dapps. Users/customers of all businesses using our solution will have a smooth experience without even knowing that they are using the blockchain and cryptocurrency technology.
Tokens issued with the TomoZ protocol follow a new standard called TRC-21 (TRC is the abbreviation of TomoChain Request for Comments). Everyone can create a TRC-21 token on TomoChain in a few clicks using TomoIssuer — a user-friendly token issuance dashboard. No need to spend thousands of USD hiring blockchain developers.
For DeFi apps, TomoZ can be tailored for issuing stablecoins. Digital wallets and payment systems can be set up via TomoZ protocol very fast and cost-effectively.
Richie: The testnet of your flagship product — TomoX — the DEX protocol is to be rolled out soon. What sets TomoX apart from other DEX protocols?
Long: TomoX Testnet is to be launched in a couple of weeks. TomoX Protocol is our relayer-masternode decentralized cryptocurrency exchange protocol. Compared to the current state of the art DEX architecture, TomoX Protocol has quite a lot of advantages, which have been described in detail in our paper (http://bit.ly/33EgSl7), the most notable are as follows:
Q1: When was TomoChain listed on Binance?
August 24th, 2019.
Q2: Which TOMO trading pairs are available on Binance.com?
TOMO/BNB, TOMO/BTC, TOMO/USDT and TOMO/USDC.
Q3: What is the name of TomoChain’s consensus?
PoSV — Proof of Stake Voting.
Q4: Name TomoChain’s most recent product and its mainnet launching date?
TomoZ — August 20th, 2019.
Q5: The testnet of which TomoChain’s product will soon be launched?
SEGMENT 3 — Chat asked Long questions. 3 Rounds of questions opened up, and Long chose 5 questions from each round the answer. Below are some of the highlighted questions Long gave answers to:
Q1: Vietnam has very few successful projects, what is the problem? Does TomoChain have any plans to support other projects in Vietnam and contribute to building a stronger Vietnamese community?
Long: I consider TOMO and TomoChain being in a very good term right now, given that we have a strong and decentralized community of Masternodes and stakers securing the chain 24/24 every single day. Furthermore, good things take time to happen, even Bitcoin took a few years to create strong values. Comparatively, TomoChain would need more time to develop and mature, expanding our reputation and values to the world.
Q2: If Ethereum figures out their scaling issues, then projects like Tomo will not be able to compete. How will you respond to it?
Long: That’s no issue actually. There are other dimensions to compare that TomoChain still proves to have advantage on, such as blocktime. TomoChain has a 2 second blocktime while Ethereum’s is about 15s, which makes TomoChain more suitable for gaming and other activities that need fast interaction. Also, target audience and the community usage of the network can be very different too.
Q3: Among some technology key points such as: Sidechain, Privacy, Shardchain, how far are Tomochain going in each aspects at the moment? What are your main focus in terms of technology at the moment?
Long: Side-chain technology is doable (can be designed and built) but we focus on the mainchain at the moment. Sharding has some serious drawbacks as inter shard communication can break smart-contract composability and this is a very serious issue. The next major research area we are working on is privacy.
Q4: TomoChain has so many outstanding features in the form of TOMO WALLET, TOMO MASTER, TOMO SCAN, etc. to name a few. But, do you have real users and partners that use your services and what marketing strategies do you have to draw new users as without marketing no matter how good the product is nobody cares?
AIS-X generated its AIS token with the TRC21 standard on TomoChain. Can you elaborate more on this and its purpose?
Is the number 150 high-quality masternodes fixed or dynamic?
Long: We do have a variety of real users using our products on a daily basis. For example: TomoWallet has around 1000 daily active users, which mean around 1000 people open the app and do something every single day. The number has actually been quite stable for the last few months. Moreover, I feel that the crypto space is still very small, so TomoChain and other crypto and blockchain projects are trying our best to push the number of users. Of course the more the merrier. So my invitation to all of you to download the app and spend sometimes with TomoChain community :)
Q5: Ethereum developers seem to be loyal (or stubborn if you prefer) to Ethereum and might wait for Ethereum to scale because I haven’t seen any major ETH dapp switching to Tomochain (or other blockchain project), so how will Tomochain persuade/attract blockchain developers (solidity developers specifically) to build on Tomochain or migrate their dapps from Eth to Tomo? Assuming that the need for higher TPS in the dapps will trigger this onboarding of developers might not work necessarily and is too passive of a strategy IMO. For example, Thundercore protocol is also EVM compatible & faster (1200 TPS) than Ethereum but solidity developers are not building there either. So what’s Tomochain/Tomoteam strategy in this regard?
Long: I don’t believe in bribing or buying developers (from Ethereum or elsewhere) to build on TomoChain. It is not the way to build an authentic community. We want to build a community with real interests and determination to help grow TomoChain ecosystem. Thus, till now, we fortunately have been working with some awesome teams such as TomoSwap, PigFarm etc. Our goal is to continue to build reliable products, and increase users experience when it comes to blockchain in general, and join TomoChain specifically.
Valence will provide a spectrum of blockchain application solutions which sit along the decentralized spectrum, offering businesses simple ways to dip their toes into the blockchain at minimal risk or complexity .Thanks to the proof of stake nature of the Valence blockchain, more of a node's resources can be used for processing and routing application data which makes the platform faster and scalable.
Valence aims to make building blockchain applications as accessible to the general public as WordPress or Squarespace has made building websites.The developers NavCoin and Valence aim to make Valence extremely easy to work with:
A Valence application could be an open source mobile or web application that submits unencrypted or encrypted data directly to the blockchain. The only configuration necessary for the app developer would be setting up the data structure. Once they've done that they can start writing to the blockchain immediately.
The Valence blockchain interface is language agnostic, meaning developers are free to build applications in whichever language they're familiar with, which greatly reduces the barrier to entry.
As the platform progresses, Valence will introduce more and more smart contract templates in collaboration with the development community. These will be like plugins that users can simply select and configure for their application, without having to reinvent the wheel and risk contract errors or spend countless hours of research to program them.
Cryptocurrency Exchange Gemini Introduces Zero-Confirmation Bitcoin Deposits Feb 1 2017 · 17:08 UTC Updated Feb 2 2017 · 21:30 by Polina Chernykh · 3 min read Gemini's unique Instant ACH ... 294871 What is Binance? Binance is one of the most standard exchanges within the world and has maintained a powerful position within the high five largest exchanges by volume since launching in July 2017. Binance could be a distinctive platform within the cryptocurrency ecosystem— instead of counting on ancient capital, Binance was launched off the rear of funding generated through an ... Fireblocks (www.fireblocks.com), an award-winning digital asset security and asset transfer platform, announced today the official launch of its Deposit Acceleration Program to partner with top global exchanges on providing the fastest on-chain settlement times for the crypto buy-side. FTX, an exchange that offers innovative products including industry-first derivatives, options, volatility ... Erweitere deine Website mit dem CoinGecko-Widget, das dir für jede Kryptowährung den aktuellen Preis anzeigt. Teste unser Bitcoin Preis-Widget, Bitcoin Chart-Widget, Ethereum Preis-Widget, Ethereum Chart-Widget und mehr. On November 3, Ripple dropped to the low at $0.2275 after a prolonged downtrend. Before now, XRP has been range-bound between $0.23 and $0.26. Now, FTX has joined as the first exchange to offer Fireblocks customers zero-confirmation deposits. “We’re really excited about partnering with the Fireblocks team to solve some of the core latency issues around moving digital assets on-chain,” said Sam Bankman-Fried, CEO and Founder of FTX. “As the first member of the program, we now have the fastest settlement venue for institutional ... Buying crypto like Bitcoin and Ether is as easy as verifying your identity, adding a payment and clicking "Buy". Sign up for our Wallet today. Create Wallet. Trade Crypto at the Exchange. Integrated with the Blockchain Wallet, our Exchange is a one-stop shop where you can deposit funds and place trades seamlessly in minutes. Get Started . Dive Deeper. Buy Crypto. Bitcoin $ USD. Your Email ... But the technology faces basic problems such as a lack of resolution and scalability for transactions at real time. Although consensus algorithms have evolved, certain Bitcoin or Ethereum blockchain deployments are synced one block at a time. This leads to long validation periods, and is one of the Trade over 40 cryptocurrencies and enjoy the lowest trading fees in America. Where Bitcoin transactions can take up to 10 minutes for confirmation, Digibyte has reduced its confirmation times to just a few seconds. That makes it one of the fastest transactional blockchains in the world. Users are able to send DGB to any other users, anywhere in the world, without paying any fees or even needing to register.
[index]          
Check out the binance links below for the PC trading Client $DRGN Dragonchain will soon be listed on Binance by way of Vote! --You can support my channel by ... #bitcoin #binance #free #airdrop #btc Terms & conditions: • Sendings should only be as Bitcoin (BTC) • Any transaction with less than 0.05 BTC will be accepted with +0.0001 BTC • All ... It is based on the Bitcoin protocol but differs from Bitcoin in that it can be efficiently mined with consumer-grade hardware. Litecoin provides faster transaction confirmations (2.5 minutes on ... Lamden (TAU) is a Robust ecosystem of dev tools that turns blockchain concepts into enterprise-grade apps capable of seamless communication and value exchange with other chains. If for whatever reason you want to buy these or other alts fast I recommend you send over either your BTC or ETH to Binance where you'll have a free wallet for everything. From there you can ... It is based on the Bitcoin protocol but differs from Bitcoin in that it can be efficiently mined with consumer-grade hardware. Litecoin provides faster transaction confirmations (2.5 minutes on ... Litecoin features faster transaction confirmation times and improved storage efficiency than the leading math-based currency. With substantial industry support, trade volume and liquidity ...